Gel Lamp

The Ohora Gel Lamp is your perfect ally for curing semi-cured nail strips, all from the comfort of your own home! Specially designed for Semi-Cured Nail Strips, this lamp will take your wraps from 60% to 100% cured with a touch of elegance.

With a contemporary design and compact size, this lamp is not only effective but also convenient, allowing you to enjoy a perfect manicure anywhere, anytime, even on the way to that special party!

This gel lamp:

• ideal for a beautiful and quick manicure
• with 6 LED lights
• to be used in combination with semi-cured nail strips
• compact and oval shape
• 45 or 60 second mode
• chargeable with USB cable
• cruelty free

Contents: 1x LED Lamp

• Step 1 – Prepare your nails:
  Start by thoroughly washing your hands to remove oils and moisture, which can reduce the adhesion of the gel nail strips. Remove any old nail polish and gently push back your cuticles. You can also lightly file your nails for a smooth base. Use the included prep pad to clean your nails and make sure they are completely dry. Optional: use Ohora Pro Nail Primer Plus for a smoother base and better adhesion of the strips.
• Step 2 – Apply the nail strips:
  Choose a gel nail strip that fits the width of your nail and gently peel it off the transparent film. Make sure the side with markings is facing your cuticle. Place the strip on your nail, leaving a small gap at the cuticle. Press firmly from the center and work towards the edges to smooth out the strip. Optional: use the rubber side of the Ohora Pro Easy Dual Stick for a perfectly smooth application.
• Step 3 – Trim and shape:
  Use the included nail file to file away any excess strip, working in a downward direction to avoid damage. For a clean finish, use the wooden stick to smooth out the edges.
• Step 4 – Curing the gel nail strips:
  Place your nails under this Ohora UV/LED lamp to cure the strips. Check if the strips are fully cured; they are ready when the gel is hard and shiny or when the lamp has finished counting down.
• Step 5 – Apply Ohora Pro Glossy Top Gel (optional):
  After curing, apply a top coat for extra shine and protection. Cure this top coat under the UV/LED lamp; this formula is non-sticky and does not need to be wiped off.
• Step 6 – Final touch-up:
  Once the strips are completely dry, you can apply cuticle oil or moisturizer to hydrate your cuticles and keep your nails looking healthy.
• Removal: Ohora gel nail strips are easy to remove with the Ohora Pro Easy Peel Remover. Apply a few drops to the strip, use the Ohora Pro Easy Dual Stick to gently lift the edge of the strip and further loosen it. Don't have Ohora remover? Use an acetone solution by placing cotton pads on your nails, wrapping them in aluminum foil and gently removing the softened gel after 10-15 minutes.